Westfalia 85 26 02 Bedienungsanleitung Seite 42

2. Insert the cutting disc.
Make sure to attach
the inner flange first
(12), than the cutting
disc (6) and finally the
outer flange (13).
 For discs up to 3 mm
thickness, install the
outer flange with the
flat side to the disc
(Fig. 1).
stronger than 3 mm,
install the outer flange
with the stepped side
to the disc (Fig. 2).
Fig. 1
 Make sure the cutting disc rotates in the direction of rotation
(4) printed on the machine housing.
 After installing a disc perform a brief test run. Discs which
cause vibrations and run unround must be replaced
immediately. Keep the disc away from moisture and oil and
protect it from either hitting or severely bumping against any
object.
Operation
For discs
Cutting Disc
Fig. 2
38
Spindle Lock
Safety Hood
Inner Flange
Outer Flange