Installing Windows For Workgroups - Siemens CP 1401 Installationsanleitung

SIMATIC NET CP 1401
7.2.2

Installing Windows for Workgroups

Procedure
© Copyright by SIEMENS AG
After you have completely installed the software, an entry
must be added in the windows directory. Follow the steps
below:
Step
1 Go to the windows directory and open the
PROTOCOL.INI file.
2 Find the section [SK$UPPSND].
3 Add the following line in the section [SK$UPPSND]:
84
S79220-A0707-A-02-7419
Description
TOPOLOGY=FromDLI