DePuy Mitek FMS DUO+ Bedienungsanleitung Seite 19

Pull on the tube and close the
tension rocker arm against the
tube.
Close the left cover.
Warning:
It is mandatory that the pressure
chamber remains vertical during
the procedure and that the pump
be positioned at the same level
as the patient.
Position the pressure chamber
in the holder.
Press Run/Stop.
Green LED blinks. The green
LED blinks initially, then
remains on.
21
Connect the transducer to the
pump by firmly screwing it in,
clockwise.
Press the Fill Chamber
pad several times until the
chamber is 1/3 full.