Chapter 2. Operating Precautions, Checks & Warnings; Storage And Handling - DePuy Mitek FMS DUO+ Bedienungsanleitung

Chapter 2. Operating Precautions,
Checks and Warnings
Warnings:
Factory Settings: Factory settings are based on
experience and should only be used as guidelines.
The surgeon is responsible for settings depending
on the surgical procedure performed.
Electrical safety testing should be performed by a
biomedical engineer or other qualified person.
Risk of electrical shock: do not remove the cover.
Refer servicing to your DePuy Mitek Sales
Representative or contact DePuy Mitek Customer
Service in the USA at +1-800-382-4682, option 2.
Do not connect the device to a power source that
is not properly earthed (grounded).
Disconnect the device from the main power source
when cleaning, servicing, or inspecting.
Inspect equipment and cables periodically for wear.
Contact your DePuy Mitek Sales Representative or
contact DePuy Mitek Customer Service at +1-800-
382-4682, Option 2 if damage is noted.
Avoid fluid contact with the FMS DUO+, and its
electrical connectors.
Do not use flammable agents when cleaning and
disinfecting the FMS DUO+.
To avoid risk of fire, replace fuses with same type
and rating.

2.1. Storage and Handling:

Storage temperature: Do not expose the FMS
DUO+ to temperatures above 50°C (122°F) or
below -10°C (14°F).
Operating Conditions: Do not operate the pump
in conditions above 40°C (104°F) or below +10°C
(50°F).
Damage: Do not use the FMS DUO+ if dropped or
showing signs of damage.
Disposal: Do not incinerate.
Contact a DePuy Mitek Sales Representative or
DePuy Mitek Customer Service in the USA at
+1-800-382-4682, Option 2, to arrange for safe
disposal.
18