Connecting The Remote Throttle Lever With The Integrated Display And Magnetic Key; Connecting The Battery - Torqeedo Ultralight 403 Bedienungsanleitung

2. If you want to connect the motor to both the kayak's rudder and steering system: Fix
the two karabiner hooks supplied to the short line. Now connect the short line to the
kayak's rudder with the triangular clamp ring at the upper end of the motor shaft.
To do so insert the karabiner hooks into the holes in the clamp ring that are designed
for this purpose and tie the other end of the line to the kayak's rudder.
Movements of the rudder to the left or right should
produce the corresponding steering movements
in the motor. For good steering it is not essential
for the steering movements to be identical.
4.4 Connecting the remote throttle lever with the integrated display and
magnetic key
Position the remote throttle in the desired position and fix it, e.g. with a RAM mount hol-
der (M4 thread in the base of the remote throttle lever) or a commercial Velcro strip (not
supplied as standard).

4.5 Connecting the battery

1. Insert the battery in the desired position in the kayak and fix it if necessary with straps
(not supplied as standard). When doing so ensure that the top of the battery (aerial
icon) is showing upwards in order to provide the GPS function. Do not cover the
battery with metallic objects or those containing metal (e.g. rescue blankets etc.).
2. Connect the cable from the motor to the battery. Ensure that there is a waterproof
bayonet closure that is placed in a particular position and screwed into place.
3. Connect the cable from the remote throttle lever to the battery. Ensure that the bayo-
net closure is waterproof and can only be fixed in one position and then screwed into
place.
64
Karabiner
hook