Torqeedo Ultralight 403 Bedienungsanleitung Seite 58

C Fixing the motor to the kayak's steering system in addition to a rudder: We recom-
mend this attachment option if you want flexibility when the motor is running and
to use the rudder when paddling.
Motor
Mark the four necessary screw positions on the mounting ball.
3. Attach the mounting ball to the kayak.
There are 2 ways to attach the mounting ball: If the inside of the kayak is accessible,
use the enclosed screws and nuts. If the inside of the kayak is not accessible, use the
enclosed expansion bolts.
A Assembly with screws and nuts:
Drill four holes with Ø 6.5 mm (0.256 in) in the
marked positions.
58
Rudder
• Test whether the steering works in the desired position and whether the
kayak's motor and rudder can be tipped out of the water before fixing
the mounting ball to the kayak.
• The drill holes for the expansion bolts must be at least 2 cm (0.787 in)
from all of the boat edges.
Connection of the
motor to the kayak's
rudder system
Kayak's steering system
Mounting ball