Remove The Rails From The Side Columns - Miele Marine PRI318 Gebrauchs- Und Aufstellanweisung

en - Installation and connection

2. Remove the rails from the side columns

Undo the screws on the rails.

Remove the rails from the back of the side columns.

To fit the laundry outfeed table, each rail must be switched over to the other side and
then screwed to the inside of the corresponding side column.
Set down the rail from the left-hand side column ready to be fitted to the right-hand side

column.
Set down the rail from the right-hand side column ready to be fitted to the left-hand side

column.
74