Waxing The Heater Plate; Starting The Waxing Programme; Using The Ironer Waxing Cloth And Ironing Wax - Miele Marine PRI318 Gebrauchs- Und Aufstellanweisung

Waxing the heater plate

Starting the waxing programme

To start the ironer waxing programme, press and hold the  button for at least

3 seconds and then press the temperature selection button .
The ironer will then switch to the waxing programme.
To deactivate the waxing programme, press the  button and then keep the  button
pressed for at least 3 seconds.
When the ironer has reached a temperature of 180 °C, the  button begins to flash. The
waxing programme is then ready to begin.
Press the flashing  button to start the waxing programme.

The heater plate can then be waxed using the ironer waxing cloth.
If waxing has been successfully carried out in the waxing programme for a period lasting
at least 40 seconds, the maintenance interval for prompting the cleaning and waxing of
the heater plate (indicated by a red symbol ) will be reset.

Using the ironer waxing cloth and ironing wax

Sprinkle some ironing wax into the pocket of the ironer waxing cloth.

Use the ironing wax sparingly to prevent the ironing cloth around the roller from becoming
too smooth.
Fold the ironer waxing cloth.

Start the waxing programme (see "Starting the waxing programme" in "Waxing the

heater plate").
en - Cleaning and care
180 °C is shown in the display.
67