Padding Instructions; Removing The Ironing Cloth (Only For Steel-Wool Roller Covering) - Miele Marine PRI318 Gebrauchs- Und Aufstellanweisung

en - Cleaning and care
Feed in the ironer waxing cloth with the rubber-coated side facing the roller into the

ironer.
Feed the ironer waxing cloth multiple times into the ironer from the left or right side at the

necessary intervals across the entire working width of the ironer. If no damp patches can
be seen on the ironer waxing cloth after it has passed through the ironer, add additional
ironing wax.
On ironers with feed-in belts, ensure that no ironing wax comes into contact with the
belts.
Otherwise the feed belts may become too smooth and can no longer be driven properly.
Press and hold the  button for at least 3 seconds once waxing is complete.

Waxing mode is deactivated.
– After waxing, feed a cotton cloth through the ironer in order to remove wax residues.
– To maintain the smooth surface of the heater plate, it should be waxed after every work-
ing day.
Always carry out cleaning in the cleaning programme and waxing in the waxing pro-
gramme, as otherwise the ironer's maintenance interval will not be reset. The mainten-
ance interval is only reset once cleaning and waxing have been carried out for at least
40 seconds in the corresponding mode.

Padding instructions

Before the ironing cloth can be removed for the purpose of cleaning or replacing the
roller, the ironer must be switched off and the heater plate allowed to cool down.

Removing the ironing cloth (only for steel-wool roller covering)

 For rollers with leaf-spring padding, removing the ironing cloth without authorisa-
tion can cause damage.
If the ironing cloth is removed without authorisation, there is a risk of damaging the leaf-
spring padding.
For rollers with leaf-spring padding, the ironing cloth may only be removed or fitted by
the Miele Customer Service Department or by trained personnel from an authorised
dealer.
Before the ironing cloth can be removed, the laundry pickers on the roller need to be
fully retracted one after the other.
68
1 .
2 .
3 .