Increasing And Decreasing The Rate - Boston Scientific db-7153-203r Gebrauchsanweisung

Vercise™ DBS Programming Manual

Increasing and Decreasing the Rate

The pulse rate of the stimulation, often called just the rate or the frequency, dictates how many
stimulation pulses are delivered in a second, measured in Hertz (Hz) or pulses per second (pps).
1 To increase the rate, click or click and hold the
Programming Screen.
Note: If you attempt to adjust the rate above the charge density limit, then you will see a
caution message.
2 To decrease the rate, click or click and hold the
Vercise™ DBS Programming Manual
91053785-02 Rev A 28 of 323
button below the RATE label on the
button below the RATE label.