Synchronizing Data - Boston Scientific db-7153-203r Gebrauchsanweisung

Synchronizing Data

To synchronize data between the database on the Clinician Programmer and the Patient Card:
1 Insert the Patient Card into any unused USB port. The Patient Card may be any external
storage device (for example, a USB flash drive).
2
Click
3
Check the box in front of a specific patient's name or click
patients.
Note: If a discrepancy is found between a patient's information on the Clinician
Programmer and the Patient Card, a window will pop-up displaying both sets of
information. Click
4
Click
names will appear in the right side of the screen, and no names will be selected.
5 Click .
on the toolbar of any screen.
under the correct set of information or click
to cancel data synchronization for this patient.
. When synchronization is complete, the synchronized patients'
Synchronizing Data
to select all the
Vercise™ DBS Programming Manual
91053785-02 Rev A 59 of 323