Fronius Robacta series Bedienungsanleitung Seite 89

The torch neck is okay if:
- The dowel pin glides fully into the centering sleeve with ease
- The dowel pin glides out of the centering sleeve with ease after the spring is released
due to the spring force
If the dowel pin does not glide into or out of the centering sleeve easily, the torch neck must
be adjusted as per the "Robacta alignment kit" Operating Instructions.
For dimensional deviations > 5 mm (0.197 inch), you should no longer set up the torch
neck on your own. In this case, please send the torch neck to Fronius for repairs
89