Storage; Environment - eta GUSTUS II Bedienungsanleitung

GB
After washing and drying the components, we recommend applying cooking oil on blades,
knives and exchangeable discs. For easier cleaning of mincer, mince a piece of hard
pastry (e.g. a croissant or a bun) at the end. Never wash D0 - D6 in a dishwasher, because
detergents can cause their darkening or corrosion!
5) Grating/slicing adapters E
Immediately after use, wash the attachments in hot water with a detergent and let dry out.
Never wash E1 - E4 in a dishwasher!
6) Blender G
Immediately after use, wash the attachments in hot water with a detergent and let dry out.
Knife cleaning procedure: pour about 0.5 l of clear water in the container, switch on the
appliance and remove the impurities by several pulses. In the case of larger amount of
impurities, repeat the procedure several times, or pour 1 litre of water, add a small amount
of detergent and switch on the blender for 1 minute. For easier cleaning, take the knife G3
from the blender base G2 according to Fig. 10. To release the knife G3.
Sealing replacement procedure
Proceed according to Fig. 10. If the sealings G4 is worn or damaged, replace it with a new
one (of identical type).
7) Poppy seed grinder H
Immediately after use, wash the attachments in hot water with a detergent and let dry out.
Proceed with maximum attention when cleaning the grinding discs! Avoid getting the
grinding edges/grooves in contact with hard items, which would blunt them and
thereby reduce their effectiveness. After washing and drying the components, we
recommend applying cooking oil on the grinding and pressure discs. Wipe the feeder H1
with a damp cloth. Do not immerse into water – avoid water getting in the internal components!
VI. STORAGE
Store the properly cleaned appliance including all accessories and attachments at a dry,
dustless and safe place, out of reach of children and incapacitated persons.
VII. ENVIRONMENT
If the dimensions allow, there are marks of materials used for production of packing,
components and accessories as well as their recycling on all parts. The symbols specifi ed
on the product or in the accompanying documentation mean that the used electrical or
electronic products must not be disposed of together with municipal waste.
For proper disposal, hand them over at the special collection places where they will be
accepted free of charge. Suitable disposal of the product can help to maintain valuable
natural resources and to prevent possible negative impacts on the environment and human
health, which could be the possible consequences of improper waste disposal. Ask for
more details at the local authority or at a collection site. Fines can be imposed for improper
disposal of this type of waste in agreement with the national regulations.
If the appliance is to be put out of operation, after disconnecting it from power supply we
recommend its cutoff and in this way it will not be possible to use the appliance again.
More extensive maintenance or maintenance requiring intervention in the inner parts
of the appliance must be carried out by professional service! Failure to comply with the
instructions of the manufacturer will lead to expiration of the right to guarantee repair!
53 / 103