Remote Commander (Pcs-R500) (Not Supplied) - Sony PMS-500P Bedienungsanleitung

Location and Function of Controls

Remote Commander (PCS-R500) (Not Supplied)

1 POWER ON key
If the Monitoring Codec is in the standby mode,
pressing this key turns on the Monitoring Codec
power.
Note
You cannot turn off the Monitoring Codec power
using this key.
2 Cursor keys (
V v B
, , ,
Use these keys to move the cursor on the monitor.
3 ENTER key
Press the ENTER key to select an item or setting.
4 Battery space (bottom)
Insert two AA alkaline batteries.
A-4
(GB) Appendix
Remote Commander (PCS-R500)
b
)
1 POWER ON key
2 Cursor keys (V, v, B, b)
3 ENTER key
4 Battery space (bottom)