Incoming List; Country Code/Spid; Chapter 2 Setup Using The Setting Menu 2-7 (Gb) - Sony PMS-500P Bedienungsanleitung

INCOMING LIST

You can check a call against the numbers registered in
the INCOMING LIST menu. The system only accepts
a call from a site registered in the INCOMING LIST.
You can enter up to 128 sites in the INCOMING LIST.
I N C O M I N G L I S T
1 .
2 .
3 .
4 .
5 .
6 .
7 .
8 .
9 .
1 0 .
M m
< > < > < E X I T > < O K >
1
Move the cursor to the number where you want to
register a remote site in the INCOMING LIST and
press ENTER.
2
Enter the remote site name from which you will
accept a call. The following screen appears.
I N C O M I N G L I S T - # 1
S I T E N A M E :
T E L :
[. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .]
[. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .]
0 1 2 3 4 5 6 7 8 9 # * ? BS
< C A N C E L > < O K >
SITE NAME: Displays the remote site name.
TEL: Enter the telephone number to be accepted.
You can register up to 44 digits. You can use
the wild card characters "?" or " * ".
?: Any one numeral
* : Any number of numerals

COUNTRY CODE/SPID

You can set a country code and SPID in this screen.
C O U N T R Y C O D E / S P I D
C O U N T R Y C O D E : [. . . . . . . . .]
S P I D 1 : [. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .]
[. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .]
S P I D 2 : [. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .]
[. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .]
0 1 2 3 4 5 6 7 8 9 # - BS
< C A N C E L > < O K >
COUNTRY CODE: Enter the country code.
SPID1: Set your SPID (service profile identifiers) for
the B1-channel.
SPID2: Set your SPID2 for the B2-channel.
Notes
• If you enter an invalid country code or SPID, the unit
will continue negotiating the ISDN network for 20
seconds, then the "SPID ERROR" message appears
on the screen. If you select <EXIT>, the
TELEPHONE menu appears.
• SPID setting is only for users in the USA or Canada.
What's a SPID?
SPIDs are Service Profile Identifiers. SPIDs are used
to identify the ISDN device and allow uniformity for
setting the ISDN device with a switcher.
Chapter 2 Setup Using the SETTING Menu
2-7
(GB)