Switching On The Cooling System - Dometic FRIGO Bedienungsanleitung

Frigo
5.2

Switching on the cooling system

!
CAUTION!
Make sure that the 220 V mains connection cable of the standby cooling
(additional equipment) is not connected!
A
NOTICE!
The cooling system remains activated when the vehicle ignition is
switched off and the ignition key is removed.
➤ Switch on the ignition.
➤ Start the engine.
➤ Turn off the automatic start/stop system if present.
Refer to the operating manual for your vehicle for information on the use and func-
tion of the automatic start/stop system.
➤ After the loading indicator lamp of your vehicle has gone out, press
SET
Figure 2: Switching on the cooling system, control test
✓ Before switching on the cooling system, the control unit performs a check to
ensure that the system is working properly. All symbols are indicated on the dis-
play for a few seconds.
EN
Operation
.
9