Dometic FRIGO Bedienungsanleitung Seite 14

Operation
Changing the target temperature in the loading area
➤ Hold down the
SET
✓ The target temperature (1) appears on the display and the °C symbol flashes.
I
NOTE
If no button is pressed for 10 seconds, the control unit switches back to
displaying the loading area temperature and the target temperature is
not changed.
➤ Within 15 seconds, change the target temperature in 1 °C steps using buttons
and .
The target temperature can be set depending on the system:
System type
Cooling unit for chilled goods: Between max. +40 °C and min. +0 °C
Deep freeze unit:
Loading area temperature
control:
➤ Briefly press the
✓ The set temperature is saved and applied as the desired target temperature for
the cooling area.
I
NOTE
The target temperature must be set to correspond to the storage tem-
perature for foods (see chapter "Storing fresh food" on page 25).
14
SET
button for 2 seconds.
Figure 8: Changing the target temperature
Temperature range for the cooling area
Between max. +40 °C and min. -20 °C
Between max. +12 °C and min. +0 °C
SET
button.
1
Frigo
EN