Automatic Review Of Last Picture; Normal Review 3.2 - Leica M Monochrom Anleitung

AuToMATIC rEvIEw oF LAsT pICTurE

In mode, each picture is displayed
Auto review
immediately after it is taken.
This allows you to quickly and easily check whether the
picture was successful or needs to be taken again.
This function enables you to select the time for which
the picture will be displayed.
setting the function
1. In the main menu (see p. 97/110), select
(4.1.14),
review
2. first in the sub­menu, and
Duration
3. then the desired function or time in the next sub­
menu that appears: ( , , ,
Off 1s 3s 5s
Release button hold ).
4. To select whether you want the picture to appear
with or without a histogram (refer to p. 140 for
details), return to the first sub­menu,
5. select ,
Histogram
6. and set the preferred option ( ,
On
review mode, you can switch back to normal, i.e.
unlimited, review mode (see above) at any
PLAY
time.
notes:
• The review functions always access the active folder
on the memory card you are using. If you want to view
pictures from other folders, you must first activate the
corresponding folder (see p. 146).
• If you have been taking photographs using the picture
series function (see p. 107), in both review modes
the last picture in the series or the last picture in the
series stored on the card ­ if not all pictures in the
Auto
series have been transferred from the camera's back­
up memory to the card at this point ­ is shown first.
Details of how to select the other pictures in the series
, ,
Permanent
and further options in review mode are described in the
sections below.
). From
Off Auto

normal review 3.2

To allow uninterrupted viewing of the pictures, only the
information in the header appears in normal review
mode (3.2.1 ­ 3.2.6).
If a section of the picture is shown, a corresponding
display also appears (see p. 95).
In addition to normal review, three other options with
different additional information are available. All four
options are in an endless loop and can be selected by
pressing the button (1.22) repeatedly.
INFO
139