Resetting All Custom Settings - Leica M Monochrom Anleitung

selecting a saved profile
1. In the picture parameters menu (see p. 97/110),
select (4.2.5), and
User profile
2. the desired profile in the sub­menu.
notes:
• If you change one of the settings for the profile
currently in use, the corresponding figure is cleared.
• If the snapshot profile is active, it can be exited at any
time by pressing the button (1.21).
SET

rEsETTIng ALL CusToM sETTIngs

This function allows you to delete all previous custom
settings in the main and picture parameters menus at
once, and reset them to the factory default settings.
setting the function
1. In the main menu (see p. 97/110), select
(4.1.18), and
2. press the SET button (1.21) to call up the
corresponding sub­menu.
3. Then use the left/right direction button (1.30) to
select the desired function, and
4. confirm your selection by pressing the
again.
note:
This reset also affects any individual profiles specified
and saved using the
Save user Profile
see above).
Reset
button
SET
function (4.1.2,
137