In The Viewfinder - Leica M Monochrom Anleitung

dIspLAys
2.1.1
2.1.2 2.1.3
2.2
2.3
94

2. In ThE vIEwFIndEr

2.1 LEds
(Light Emitting Diodes)
(with automatic brightness control, which
responds to the ambient brightness
2.1.1 Four­digit seven­segment digital display with dots
above and below
Digital display:
– Displays the automatically determined shutter
speed for aperture priority
down shutter speeds longer than 1s
– Warning that the metering or setting ranges are
overshot or undershot
using aperture priority
– Displays the exposure compensation value
(briefly during adjustment)
– Indicates that the buffer memory is
(temporarily) full
– Indicates that no memory card is loaded (
– Indicates that the memory card is full (
2.1
Dot above:
– Indicates (when lit) that
metering memory lock is being used
Dot below:
– Indicates (flashing) that exposure
compensation is being used
1 Automatic control is not available for Leica M lenses with viewfinder
attachments, since they cover the brightness sensor 1.4 which
supplies the information required. In such cases the displays always
maintain a constant brightness.
2.1.2 Two triangular and one circular LED:
1 ) for:
2.1.3 Flash symbol:
, or for counting
A
2.2
2.3
A
Sd )
)
Full
– For manual adjustment: Jointly used as light
balance for exposure compensation
– Warning of values below the metering range
– Flash readiness
– Details of flash exposure before and after
the picture
bright line frame for 50mm and 75mm
(example)
Metering field for distance setting