Automatic Rewind Of Fully Exposed Film; Rewinding A Partially Exposed Film; Accessories - Leica CM Anleitung

Automatic rewind of fully exposed film

The film starts to rewind automatically after the last exposure at
the end of the film. The frame counter in the data panel (19)
counts backwards, with the frame numbers and segments run-
ning backwards as confirmation of rewinding appearing alter-
nately. The motor stops when the film is rewound. The
counter flashes to indicate that the completely rewound film can
now be removed.
Important: If the motor stops without the
flashing, the battery needs to be replaced. Do not open the back
of the camera or the partially rewound film will be exposed to the
light, making it unusable, the shots taken will be ruined. After in-
serting the new battery, press the mid-roll rewind button (26) on
the bottom of the camera to continue rewinding the film.

Rewinding a partially exposed film

The motorized film rewind can be activated manually at any time,
so that a partially exposed film can be developed, for example.
To do this, press the mid-roll rewind button (26) on the bottom of
the camera using a ballpoint pen or similar object.

Accessories:

Carrying Strap, approx. 50 cm long
(supplied with camera – replacement)
Wrist strap (supplied with camera – replacement)
LEICA Electric Cable Release (approx. 30 cm long)
0
in the
Leather case with belt loop
LEICA Mini Tripod
0
in the data panel
111
Order No.
18 529
18 528
18 540
18 560
14 320