Torqeedo Ultralight 1103 A/AC Originalbetriebsanleitung Seite 106

DE EN
Park position
ADVI CE
The park position can be used only for the model 403 A/AC.
Fig. 78: Park positions
4 Rubber expander
1. Open the clamping ring/control triangle under the motion link using the quick
clamp.
2. Direct the shaft upwards through the motion link.
3. Tilt the motor upwards.
page 106 / 128
4
4. Insert the heel of the control triangle/clamping ring into the recess provided be-
tween the guide hole, the swivel cord, and the guide hole of the cord for reverse
fixing.
5. Fix the shaft using the rubber expander (4) on the bracket.
6. Fix the clamping ring/control triangle using the quick clamp.
Clamp the rubber expander (4) above the control triangle and the clamping
ring.
Operation
ADV ICE