Fixing The Steering In Place - Torqeedo Travel 503 Originalbetriebsanleitung

DE EN
1. Connect the motor cable (9) to the motor cable connector (10).
2. Tighten the union nut on the motor cable.
3. Connect the tiller cable (7) to the tiller cable connector (8).
4. Tighten the union nut of the tiller cable.
6.2

Fixing the steering in place

Fig. 47: Small fixing pin position
1 Small fixing pin
page 76 / 112
1
The small fixing pin (1) can be used to prevent the motor from making steering
movements. The boat can then be steered via the rudder (e.g. with sailboats). Lock-
ing the steering is optional.
1. Remove the battery.
2. Push the small fixing pin (1) into the opening provided for it.
3. Install the battery; see description Chapter 6.1, "Installation of the drive to the
boat".
Start-up