SWM RS 300 R Handbuch Seite 112

Washing the chain with O-rings
Wash using petroleum, naphtha or paraffin oil.
Never use fuel, trichloroethylene or solvents, as the
O-rings may get damaged.
Use instead special sprays for chains with O-rings.
Lubricating the chain with O-rings
Lubricate all metallic and rubber (O-ring) elements
using a brush and engine oil with SAE 80-90 viscos-
ity, inside and outside parts.
CAUTION*: The chain lubricant shall NEVER get
in contact with the tyres or the rear brake
disc.
EN - 42
Chain guide roller, chain guide eye, chain
slider
Check the wear of the above-mentioned elements
and replace them when necessary.
CAUTION*: Check the chain guide alignment,
and remember that a bent element can cause
chain early wear. In this case, chain might un-
wrap from the sprocket.
3
1
2
1 - Chain tensioner roller
2 - Chain guide eye
3 - Chain slider