Permanently Changing Beverage Settings; Changing Default Settings - Melitta Passione OT Bedienungsanleitung

1. Place two vessels beneath the outlet (6).
2. Press the "Two cups" button (29).
3. Continue as described for the relevant beverage preparation.
Information
ū The setting only applies to the single beverage that is prepared.
ū If a beverage is not prepared within 1 minute, the appliance switches to
single-cup dispensing.
6

Permanently changing beverage settings

The appliance offers further options for preparing coffee specialities.
Default recipes can be used or the beverage settings can be permanently
changed.
6.1

Changing default settings

Depending on the beverage, the following default settings can be changed:
ū Coffee amount: 25 ml to 220 ml
ū Milk amount or milk froth amount: 25 ml to 220 ml
ū Hot water amount: 25 ml to 220 ml
ū Coffee strength: Very mild, mild, normal, strong, very strong
ū Temperature: Low, normal, high
Information
Changed default settings remain valid until they are changed again.
Changing the beverage settings is similar for all beverages. Changing the
coffee strength for an Espresso is described here as an example.
Direct keys
Espresso
Coffee strength
Strong
Confirm with OK:
Fig. 15: Setting the coffee strength
Permanently changing beverage settings
73