Connecting The Aerial; Connecting The Hands-Free Microphone - Renkforce AN-8006 Bedienungsanleitung

• The constant current terminal +12V (4) must be connected to a cable that also supplies 12V permanently when
the ignition is off (terminal 30 of the on-board network). This terminal serves to save the user settings, time, etc.
• The aerial control output (5) supplies a voltage of +12V when the device is switched on. This cable can be used
for the power supply of an electrical aerial, and for the voltage for switching on a vehicle amplifier.
• The terminal of the ignition +12V (7) must be connected to a cable that is only live with +12V when the ignition
is on (terminal 15 of the on-board networks).
Do not connect this terminal to continuous current, otherwise the on-board battery could be discharged when the
vehicle is parked for a longer period of time.
• Connect the ground connection (8) with the vehicle body.

Adhesive techniques which become ever more common and painted metal parts impair the electric
conductivity. Therefore not every metal part is a suitable earthing point.

Connecting the aerial

• Connect the aerial plug of your vehicle with the aerial socket at the back of the radio (socket next to the LINE
terminals).
• If your vehicle has a different aerial plug, please use a suitable adapter, available in specialist shops.

Connecting the hands-free microphone

• Connect the plug of the hands-free microphone with the corresponding socket on the back of the device.
61