Connecting additional monitors
The DVD tuner features video outputs for additional monitors. They can be controlled separately using dual zone
playback which allows passengers to watch movies, e.g. on headrest monitors, while the driver is listening to the
radio.
•
Connect the VIDEO OUT 1 and VIDEO OUT 2 sockets to the video inputs of the additional monitors.
•
Connect the DVD AUDIO OUT sockets to the audio inputs of the additional monitors.
Connecting an external video or audio source
•
Connect the VIDEO IN socket to the video output of the external video source.
•
Connect the AUX input (15) to the audio output of the external video or audio source.
You can also operate an audio device on the AUX input (15) without using the VIDEO IN socket on the
back of the device. In this case, of course, there will be no video playback.
Connecting the aerial
•
Connect the aerial plug of your vehicle to the ANTENNA CONNECTOR socket at the back of the device (socket
next to the RCA sockets).
•
If the aerial plug of your vehicle does not fit, use a suitable adapter available in specialist shops.
63