Recording Voice Message; Restoring Factory Settings - Renkforce 751514 Bedienungsanleitung

10.26 Recording voice message

The control panel is fitted with the "RECORD" button and an integrated microphone (labelled "MIC" on the
front side of the control panel).
Proceed as follows to record your unique voice message:
• Press the "RECORD" button, the "RECORDING" LED is lit.
• You can now talk to record your 20 second long voice message.
• Once the time is complete, the "RECORDING" LED goes out.
Information regarding the voice message:
• It is recommended that you write down the voice message on a piece of paper.
• Check the amount of time you need to say the text.
• Maintain a distance of approx. 30 cm from the microphone.
• Say your message clearly and at a normal speaking volume.
• you can record the message as often as you need to, the previous recording is deleted each
time you record.

10.27 Restoring factory settings

If you are no longer sure which changes you have made, you can reset the alarm control centre to a defi-
ned factory setting.
Memory location
02
Now all the settings are reset to the original factory settings. You can view these settings in the following
overview and in the individual chapters for programming steps.
Confirmation
#
129