Reely SKY Jet Liner Bedienungsanleitung Seite 42

Push the nose landing gear with the linkage rod first into the provided recess in
the fuselage nose.
Make sure that the linkage rod is inserted through the guide (1).
Screw on the nose landing gear on the fuselage using four wood screws.
The nose landing gear is controlled together with the rudder. Therefore, it is
connected to the same servo.
Insert the linkage (1) into the linkage connector (2). Make sure that the nose
wheel is straight and that the rudder horn is at a 90° angle to the servo.
Then shorten the linkage with an excess length of approx. 5 mm and secure
the grub screws of the linkage connection using threadlocker.
42
Figure 11b
Figure 11c
Figure 11d