B) Installing The Antenna Wire - Reely SKY Fire Flame Bedienungsanleitung

b) Installing the Antenna Wire

• The antenna wire (1) of the receiver must be installed
in such a way that it ensures the maximum reception
and cannot get tangled up in the rotating parts of the
helicopter's mechanics.
• In practice, it has been tried and tested to lead the
antenna wire from the left bearing retainer toward the
rear to the tail tube and attach it there with a small strip
of cello tape (2).
The protruding part of the antenna wire is then led back
toward the front to the right bearing retainer and likewise
attached with a strip of cello tape (3).
The rest of the receiver antenna (4) can then hang down
loosely during the flight.
50
Figure 4