Cleaning Airless Spray Gun - WAGNER ProSpray 21 Betriebsanleitung

8.3 Cleaning Airless spray gun

– Rinse Airless spray gun with an appropriate clea-
ning agent.
– Clean tip thoroughly with appropriate cleaning
agent so that no coating material residue remains.
– Thoroughly clean the outside of the Airless spray
gun.
Intake filter in Airless spray gun
Dismounting (Fig. 8)
1.
Pull protective guard (1) forward vigorously.
2. Screw grip (2) out of the gun housing. Remove
intake filter (3).
3. Intake filter congested or defective – replace.
Mounting
1. Place intake filter (3) with the long cone into the gun
housing.
2. Screw in grip (2) into the gun housing and tighten.
3. Slot in protective guard (1).
1
ProSpray 21
a r
0 b
s i
2 5 0 p
6 0
x .3
m a g :
rn in
W a a r
c le
e p
k e ti p
o f
g
3
2
Cleaning the unit (shutting down)
35