Instruction Signs On The Device; Technical Modifications; Manufacturer's Guarantee - ergoline INSPIRATION- S SERIES Gebrauchsanweisung

Information for the operator
14
Further details can be found in the information brochure 'Audio Guide' avail-
able in German and English on the Internet at www.jk-global-service.de.
2.15

Instruction signs on the device

See Appendix page 65.
2.16

Technical modifications

The device has been constructed in accordance with the current state-of-the-
art and the applicable safety regulations. The illustrations and specifications
on these instructions are subject to technical modifications which are required
in order to improve the device.
Unauthorized modifications and changes to the device and its control unit are
prohibited. Failure to comply voids the EC conformity declaration and the GS
seal!
Please use only original spare parts. Failure to comply voids the EC confor-
mity declaration and the GS seal!
2.17

Manufacturer's guarantee

Ergoline accepts liability for any tanning device defects that arise in accor-
dance with the following regulations on behalf of customers who have pur-
chased an Ergoline tanning device for private or commercial use from one of
Ergoline's sales partners; consumable parts such as UV-high pressure lamps
(bulb), UV-low pressure lamps (tubes) and starters as well as the acrylic glass
panel itself are not covered by the guarantee.
The guarantee stipulates that Ergoline will rectify any defects within a time
period predetermined by Ergoline by repair or exchange of the defective part.
Claims made in accordance with this guarantee can be lodged with Ergoline
or the Ergoline sales partner from whom the product was purchased on pres-
entation of the guarantee card or invoice; this guarantee is valid for a period
of 24 months from the date of purchase.
This does not affect the rights of the customer under the existing guarantee
with regard to any claims that the customer might have in accordance with the
contract of purchase.