Cleaning Or Replacing Uv Lamps In The Base; Cleaning Or Replacing Uv Lamps And Filter Panels In The Canopy - ergoline INSPIRATION- S SERIES Gebrauchsanweisung

01/2011 1007387-01
5.9 Cleaning or replacing UV lamps in
the base
– Lift up the acrylic glass panel and then remove the lamp covers and the
partition: see page 36.
Replacing the lamps: see page 39.
Replacing the starter: see page 41.
The assembly is the same process in reverse order.
When assembling please note:
– Clean the partition.
– Hold the partition with a cloth in order to prevent finger prints.
5.10 Cleaning or replacing UV lamps and
filter panels in the canopy
– Removing the canopy panel: see page 37.
The following components listed in the maintenance plan are fitted in the
canopy:
1.80 m UV low pressure lamps
Facial tanner UV low pressure lamps and the associated starter
Facial tanner UV high pressure lamps
Facial tanner filter panels
The facial tanner's UV low pressure lamps must be removed first so that the
UV high presure lamps and the filter panels can be changed.
INSPIRATION 400-S:
These devices have 2 UV low pressure lamps in the facial tanner.
– Remove the lamps.
Cleaning and maintenance
Operating instructions – 43