Parker AC30V Benutzerhandbuch Seite 230

D-2
Parameter Reference
App Info
Parameters::Application::App Info
Details of the Application loaded in the Drive. An Application is built as part of a project using a suitable programming tool. When downloaded into
the Drive an Application within the Project can be selected to run. Some Projects only contain a single Application, so in this case will always be
selected.
PNO Parameter Descriptions
1040
Project File Name
The name of the file on the programming PC used to store the application. (This does not include the .project or .projectarchive file
name extension.)
1047
Last Modification
Timestamp of when the loaded Project was last modified. (Note - the RTC option is not required for this.)
1048
IDE Version
The version of programming tool (Interactive Development Environment) used to create the loaded Project.
1054
Project Author
The Author of the loaded Project as entered in the programming tool when it was created.
1061
Project Version
The Project version of the loaded Project as entered by the programmer when creating the Project.
1068
Project Description
A description of up to 80 characters entered by the programmer when creating the Project.
1554
Application Name
The name of the selected Application within the loaded Project.
AC30V series Variable Speed Drive