Positioning Speed; Maximum Brake Flank - Dürkopp Adler 550-12-23 Bedienungsanleitung

6.2.8 Positioning Speed

6.2.9 Maximum Brake Flank

With this parameter the positioning speed can be set.
The display of the positioning speed is to be multiplied by a factor of
10. Only the upper three digits of the value are entered. (e.g. Rpm
1000 - Display 100).
Order of operations
–
Hold down the "Y" key and tap the "E" key.
The parameter menu is turned on.
–
Advance to the desired parameter through repeated pressing of
the "Y" key.
–
Enter the desired rpm with the 0 to 9 keys.
After the entry of the third number the entry is automatically
concluded.
If fewer than 3 numbers are to be entered, conclude the entry with
the "E" key.
With this parameter the speed limitation for the brake flank can be set.
The display of the speed limitation is to be multiplied by a factor of 10.
Only the upper three digits of the value are entered. (e.g. Rpm 1000 -
Display 100).
Order of operations
–
Hold down the "Y" key and tap the "E" key.
The parameter menu is turned on.
–
Advance to the desired parameter through repeated pressing of
the "Y" key.
–
Enter the desired rpm with the 0 to 9 keys.
After the entry of the third number the entry is automatically
concluded.
If fewer than 3 numbers are to be entered, conclude the entry with
the "E" key.
3
29