Safety Notes - geo-FENNEL ECOLINE EL 639 Bedienungsanleitung

EN
4 USE WITH RECEIVER
To prolong the working range or at unfavourable light conditions EL 639 can
be used with receiver.
Press button „P" (the receiver mode LED is illuminated) to change to recei-
ver mode. The receiver can now detect the signal of EL 639 (the visibility of
the laser lines is weaker in this mode).
The working range can be extended up to 60 meters by use of the receiver.
More detailed information you will find in user manual of the receiver.
14 www.geo-fennel-ecoline.com

SAFETY NOTES

SPECIFIC REASONS FOR ERRONEOUS MEASURING RESULTS
Measurements through glass or plastic windows; dirty laser emitting win-
dows; after instrument has been dropped or hit. Please check accuracy.
Large fluctuation of temperature: If instrument will be used in cold areas
after it has been stored in warm areas (or the other way round) please wait
some minutes before carrying out measurements.
CARE AND CLEANING
Handle measuring instruments with care. Clean with soft cloth only after
any use. If necessary damp cloth with some water. If instrument is wet
clean and dry it carefully. Pack it up only if it is perfectly dry. Transport in
original container / case only.
ELECTROMAGNETIC ACCEPTABILITY (EMC)
It cannot be completely excluded that this instrument will disturb other ins-
truments (e.g. navigation systems); will be disturbed by other instruments
(e.g. intensive electromagnetic radiation nearby industrial facilities or radio
transmitters).
CE-CONFORMITY
Instrument has CE-mark according to EN 61326:1997 , EN 55022,
EN 61000-4-2/-3.
EN
15
ECOLINE
5