EN
SAFETY NOTES
E
SAFETY INSTRUCTIONS
·
Follow up the instructions given in the user manual.
·
Do not stare into the beam. The laser beam can lead to eye injury. A direct look into the beam (even from greater
distance) can cause damage to your eyes.
·
Do not aim the laser beam at persons or animals.
·
The laser plane should be set up above the eye level of persons.
·
Use the instrument for measuring jobs only.
·
Do not open the instrument housing. Repairs should be carried out by authorized workshops only. Please contact
your local dealer.
·
Do not remove warning labels or safety instructions.
·
Keep the instrument away from children.
·
Do not use the instrument in explosive environment.
·
The user manual must always be kept with the instrument.
CARE AND CLEANING
Handle measuring instruments with care. Clean with soft cloth only after any use. If necessary damp the cloth with
some water. If the instrument is wet clean and dry it carefully. Pack it up only if it is perfectly dry. Transport in original
container / case only.
SPECIFIC REASONS FOR ERRONEOUS MEASURING RESULTS
Measurements through glass or plastic windows; dirty laser emitting windows; after the instrument has been dropped
or hit. Please check the accuracy.
Large fluctuation of temperature: If the instrument will be used in cold areas after it has been stored in warm areas (or
the other way round) please wait some minutes before carrying out measurements.
ELECTROMAGNETIC ACCEPTABILITY (EMC)
It cannot be completely excluded that this instrument will disturb other instruments (e.g. navigation systems); will be
disturbed by other instruments (e.g. intensive electromagnetic radiation nearby industrial facilities or radio transmit-
ters).
CE-CONFORMITY
The instrument has the CE-mark according to EN 61000-6-3:2007 , EN 61000-6-1:2007 , IEC 60825-1:2008-05.
24