Starter; Cleaning / Replacing Uv High Pressure Lamps And Filter Panels In The Canopy - ergoline OPEN SUN PILOT Gebrauchsanweisung

06/2011 1004193-01
5.7.2

Starter

Replace faulty starters immediately.
You can recognise a faulty starter by the blackened ends of the (UV) low
pressure lamps or when the (UV) low pressure lamps can no longer be
started.
Operating a (UV) low pressure lamp with a faulty starter significantly shortens
its service life. The (UV) low pressure lamp loses power and may begin to
flicker under certain circumstances.
The starters are located in either one of the two lamp sockets or become
visible when the (UV) low pressure lamps are removed.
5.8 Cleaning / replacing UV high pressure
lamps and filter panels in the canopy
The UV high pressure lamps are located in the device arms.
– Fold the device arm to the side.
– Remove the screws and fold out the cover.
– Release the clamping holder.
– Lift the filter panel, pull it out of the guide and remove it.
Cleaning and maintenance
Operating instructions – 37