06/2011
1004193-01
WARNING!
Acrylic glass panels unusable due to soiling!
Soiling on the panels is burned in by the hot lamps and
results in the long term in unserviceable panels.
–
Remove fingerprints and other soiling carefully.
Plastic surfaces
For cleaning the remaining painted and unpainted plastic surfaces, it is best to
simply use warm water and a leather cloth. Never use aggressive cleaning
agents containing alcohol or essential oils. These may lead, in the long run, to
damages not covered by the guarantee.
During cleaning a slight discolouration of the leather cloth by the rubber seals
must be expected for production-related reasons.
Prevent damage to the acrylic glass and plastic surfaces.
–
Remove rings, watches, bracelets etc. before starting cleaning work.
5.3.2
Filter panels and lamps
Low pressure UV lamps and filter panels can be cleaned with a damp
cloth and without additional cleaning agents where necessary.
High pressure UV lamps can be cleaned with ethyl alcohol where neces-
sary.
5.4
Cleaning plan
Cleaning and maintenance
Operating instructions – 33