Emmaljunga Sento Bedienungsanleitung Seite 59

seat unit inclusive the fabric on the
headrest.
7) Insect Net (delivery with chassis)
FLAT+
7.1 Attach the Insect net using the zipper
on the hood. Pull the elasticated band
of the insect net completely over the
footrest.
7.2 Use the press stud to secure the
elasticated band of the insect net
onto the seat unit. Repeat on the
other side.
8) Assembly of the apron
(accessories)
8.1 Pull the apron over the footrest.
8.2 Fasten the apron with the press studs
on the inside of the hood and on the
seat frame.
8.3 Open the zip in the middle of the
apron when taking your child in or out
of the pram.
IMPORTANT! The hood cannot be
folded down when the apron is attached
to the hood.
9) Raincover (accessories)
9.1 Assemble the rain cover by placing it
over the hood and the carrycot or the
seat unit.
9.2 The rain cover has a large window at
the top opening that you can open
and close with the Velcro fasteners.
9.3 Make sure that the side ventilation
windows are always open and free
so that ventilation is ensured. Always
use rain protection when it is raining
or snowing. If the stroller is wet, try to
dry it first before using the rain cover.
Let the rain cover dry properly before
putting it back in its pocket.
SENTO, SENTO PRO Carrycot+, ERGO+, FLAT+ v. 3.0
5-point harness
(FLAT+)
1) 5-point harness FLAT+ - Buckle
the Child
1.1 Adjust the headrest into the position
so that the shoulder straps are in level
with your child's shoulders. The height
of the shoulder straps and the head
cushion can be adjusted by pulling
the release handle upwards at the
top of the headrest and pulling the
headrest up or down.
1.2 Make sure that each shoulder
harnesses is correctly clicked together
with the clips and covered by the
shoulder pads. The shoulder pads
have to be fastened with a press
studs.
1.3 Place the child into the FLAT+ seat
unit.
1.4 When the child is positioned, place
the shoulder straps over the child's
shoulders.
1.4 Click the right buckle over the left
buckle until they are held together as
a unit
1.5 Close the harness with the harness
lock on the crotch strap with a
"CLICK"
WARNING
Always check that the belt is properly
closed by pulling on it.
1.6 Tighten the harness by pulling the
strap on the back of the backrest.
1.7 Pull the backrest handle upward and
hold it to loosen the harness.
1.8 Open the harness by pressing on the
central lock.
Emergency opening function
• If you need to quickly release the
belt you can press on the central
lock.
• You can even open the shoulder
straps by clicking on the clips
under the shoulder pads.
SE
SE
2-13
14-36
EN
2-16
42-67
DE
2-13
60-86
DK
2-13
87-110
FI
2-13
110-132
NO
2-13
133-155
CZ
SE SE
2-13
156-178
EE
2-13
179-202
ES
2-13
203-227
LT
2-13
228-251
LV
2-13
252-275
PL
2-13
276-301
59