Parkside PEKS 1600 C3 Bedienungsanleitung Seite 15

Residual risks
The product has been built according to state-of-
the-art and the recognised technical safety rules.
However, individual residual risks can arise during
operation.
• Residual risks can be minimised if the "Safety In-
structions" and the "Intended Use" together with
the operating manual as a whole are observed.
• Use the product in the way that is recommended in
this operating manual. This is how to ensure that
your product provides optimum performance.
• Furthermore, despite all precautions having been
met, some non-obvious residual risks may still re-
main.
• Keep your hands away from the working area when
the product is in operation.
• Damage to hearing if the stipulated hearing protec-
tion is not worn.
• Damage to the lungs if the stipulated respiratory
protection is not worn.
• Risk of injury from tools thrown away due to im-
proper holding or guiding.
• Health hazard due to electrical power, with the use
of improper electrical connection cables.
• Avoid accidental start-up of the product: when in-
serting the plug into the socket, do not press the
on/off switch.
• Before performing setting or maintenance work, re-
lease the on/off switch and pull out the mains plug.
WARNING
This power tool generates an electromagnetic field
during operation. This field can impair active or pas-
sive medical implants under certain circumstances.
In order to prevent the risk of serious or deadly inju-
ries, we recommend that persons with medical im-
plants consult with their physician and the manufac-
turer of the medical implant prior to operating the
power tool.
WARNING
In case of extended working periods, the operating
personnel may suffer circulatory disturbances in their
hands (vibration white finger) due to vibrations.
Raynaud's syndrome is a vascular disease that caus-
es the small blood vessels on the fingers and toes to
cramp in spasms. The affected areas are no longer
supplied with sufficient blood and therefore appear
extremely pale. The frequent use of vibrating prod-
ucts can cause nerve damage in people whose cir-
culation is impaired (e.g. smokers, diabetics).
If you notice unusual adverse effects, stop working
immediately and seek medical advice.
7 Technical data
AC motor
Nominal power S1*
Protection class
Protection category
Chain speed
Guide rail
Chainsaw guide bar length
Cutting length
Chain pitch
Number of chain wheel teeth
Type of saw chain
Type of guide bar
Tank / chain oil
Weight (with chainsaw guide bar
and saw chain)
Weight (without chainsaw guide
bar, saw chain and cable)
Subject to technical changes!
*Operating mode S1 (continuous operation)
The product can be operated continuously with the
specified power.
Noise and vibration
WARNING
Noise can have serious effects on your health. If the
machine noise exceeds 85 dB, please wear suitable
hearing protection for you and persons in the vicinity.
Noise data
Sound pressure level L
pA
Measurement uncertainty K
Measured sound power level L
Guaranteed sound power level L
Measurement uncertainty K
Vibration parameters
Vibration a
h
Front handle
Rear handle
Measurement uncertainty K
The total vibration emission values specified and the
device emissions values specified have been mea-
sured in accordance with a standardised test proce-
dure and can be used for comparison of one electric
tool with another.
220-240V AC /
50/60 Hz
1600 W
IPX0
15 m/s
14"
415 mm
340 mm
3/8"
52 teeth
3/8LP-52
AP14-52-507P
0.35 l
approx. 4.8 kg
approx. 4.2 kg
95.3 dB
3 dB
pA
103.3 dB
wA
106 dB
wA
3 dB
wA
3.26 m/s
3.51 m/s
1.5 m/s
GB |
II
2
2
2
9