Werbung
Verfügbare Sprachen
Verfügbare Sprachen
10.11
SERIAL communication menu
The indicated data is only indicative
The SERIAL menu may be used to enable the WIFI connection in order to use the B74/BCONNECT module;
to do this, it is necessary to enable communications and select the TARGET B-CONN.
COM
ENTER
ENABLE
BAUDRATE
PERIOD
TARGET
ENTER
90
SERIAL
WIFI
UPDATE
ESC
OFF
----
----
----
ESC
ON = serial communication enabled
OFF * = serial communication disabled
(*) Make sure it's always set to OFF
Selection of the communication BAUDRATE.
Selection of the time interval for sending data, in seconds
(frequency of LOG events).
min.
B-CONN
115200)
DEBUG
Enable calibration device (for ROGER only,
PCLOG
Enables LOG data to be sent to a PC,
adjustable baudrate (for future use)
Return to the previous menu
COM
Werbung
