Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4
Technical characteristics of product
MAINS POWER VOLTAGE
MAXIMUM MAINS POWER ABSORPTION
(FROM NETWORK)
STARTING POWER (FROM NETWORK)
FUSES
COMPATIBLE INVERTER MODULES
INVERTER MODULES POWER SUPPLY
INVERTER MODULES SERIAL CONNECTION
INVERTER CONTROL TYPE
MOTOR TYPE
RATED POWER PER MOTOR
STARTING POWER PER MOTOR
MAXIMUM POWER, FLASHING LIGHT
FLASHING LIGHT DUTY CYCLE
MAXIMUM POWER
GATE OPEN LIGHT POWER
ELECTRIC LOCK POWER
MAXIMUM ACCESSORY CURRENT
ABSORPTION
OPERATING TEMPERATURE
DEGREE OF PROTECTION
PRODUCT DIMENSION
(*) The electric lock output provides a voltage of 36V
The device to be connected must therefore be able to withstand a maximum voltage of 40V .
The total of the absorption values of all the accessories connected must not exceed the maximum power values
shown in the table. The values are guaranteed with original ROGER TECHNOLOGY accessories ONLY. The use of
non-original accessories may lead to malfunctioning. ROGER TECHNOLOGY declines all responsibility for incorrect or
non-conforming installations. All the connections are protected by fuses (refer to the table). The courtesy light requires
an external fuse.
All the connections are protected by fuses (refer to the table). The courtesy light requires an external fuse.
230 V~ ± 10% 50 Hz
(F70/IPU36/115 - 115 V~ ± 10% 60 Hz)
230 W
600 W
F1 = 20A motor power supply circuit protection
F2 = 4A electric lock power supply protection
F3 = 10A battery powered circuit protection
F4 = T2A transformer primary protection
2
36V
RS485, ModBus Protocol, 115200 baud
sensored, with high resolution encoder (on-board motor)
ROGER BRUSHLESS WITH INVERTER ON BOARD (RS485)
- with on-board 36V~ variable frequency inverter
90 W
250 W
10 W (24 V )
50%
100 W 230 V~ - 40 W 24 V~ /
3 W 24 V
15 W 12 V
(mean voltage) (*)
20 W 24 V
(750 mA - electronic overload protection)
-20°C
+55°C
IP54
nominal (max 40V ) modulated to 30% (30% ON, 70% OFF).
F70/IPU36
(pure contact)
69
Werbung
