Werbung
Verfügbare Sprachen
Verfügbare Sprachen
10.2
Control unit operating parameters set-up menu
The indicated data is only indicative
F70/IPU36
ENTER
OK
1
ENTER
ENTER
76
R1.50
ESC
ESC
ESC
indicates whether the selected parameter is part of the
settings for motor 1, motor 2, both motors, or (no additional
indication) if the parameter is dedicated exclusively to
the control unit (e.g. par.
"OK" = the value of the displayed parameter coincides
with that stored in the inverter of the indicated motor
"E" = the value of the parameter is different
"--" = it was not possible to read the value stored in the
inverter (motor disconnected or not communicating)
ENTER
OK
1
ENTER
Use the + and - keys to scroll through the list of parameters.
Use the + and - keys to modify the value of the individual
parameter
Saves the value, the cursor returns to the left hand text
box so that it is possible to continue scrolling through the
list of parameters
).
OK
2
ESC
OK
2
ESC
Werbung
