Angelo Po 1N0FAB Bedienungshandbuch Seite 175

REPLACING PARTS
REPLACING THE TOP BURNER NOZZLE Ø 110 7 KW
To carry out this operation, proceed as follows.
Turn off the gas supply
)
tap.
Remove the grid (A).
)
Extract the burner (B).
)
Unscrew the nozzle (C)
)
and replace it with the
one suitable for the type
of gas in use (see table at
back of manual).
Replace the burner and
)
the grid.
REPLACING THE TOP BURNER NOZZLE Ø 130 10 KW
To carry out this operation, proceed as follows.
Turn off the gas supply tap.
)
Pull off the knob (A).
)
Undo the screws (C) and remove the con-
)
trol panel (B).
Unscrew the nozzle (D)and replace it with
)
the one suitable for the type of gas in use
(see table at back of manual).
Replace the control panel (B) and the
)
knobs (A) on completion of the operation.
To carry out this operation, proceed as follows.
Turn off the gas supply tap.
)
Undo the screws (B) and remove the control
)
panel (A).
Unscrew the nozzle (C) and replace it with
)
the one suitable for the type of gas in use
(see table at back of manual).
Replace the control panel (A) on comple-
)
tion of the operation.
3319981_inst_GB
A
REPLACING THE OVEN BURNER NOZZLE
B
C
A
C
B
A
B
ENGLISH
8
C
D
8
C
19