Removing The Spirit Z-Wave Plus - Eurotronic SPIRIT ZWAVE PLUS Kurzanleitung

If you are not sure which valve you have, please visit:
www.eurotronic.org/Produkte/Adapter Information.
Here you will find a list of various valves and adapters.

Removing the Spirit Z-Wave Plus

Exclude the Spirit Z-Wave Plus from the network before
removing. Set Z-Wave Controller in Exclusion mode.
Hold the boost button for at least 5 seconds to exclude.
When this process is finished,
Unscrew the cap nut and remove Spirit Z-Wave Plus off
the valve.
1.
is again on the display.
INC
2.
EN
35