Formats Of The Data Output (6/7-Digits); Data Composition - KERN PES Serie Betriebsanleitung

The tare subtraction can be performed by an external device by
connecting a contact or a transistor switch between pin 1 (EXT. TARE)
and pin 5 (GND). A switch-on time of at least 400 ms must be observed
(open-circuit voltage: 15 V when the scale is switched off, leakage current:
20 mA, when it is switched on).

19.3 Formats of the data output (6/7-digits)

• These data formats are only available for the PES weighing system.

19.3.1 Data composition

• 6-digit data format
Consisting of 14 characters, including the end characters (CR= 0DH, LF= 0AH)*.
1 2 3
P1 D1 D2
• 7-digit data format
Consisting of 15 characters, including the end characters (CR= 0DH, LF= 0AH)
1 2 3
P1 D1 D2
* End characters: CR = paragraph, LF = line
74
4 5 6 7
D3 D4 D5 D6
4 5 6 7
D3 D4 D5 D6
8 9 10 11
D7 U1 U2 S1
8 9 10 11
D7 D8 U1 U2
TPES-B_TPEJ-B-BA-def-2319
12 13 14
S2 CR LF
12 13 14
S1 S2 CR
15
LF