Take Over Measurement Deviation - KERN PES Serie Betriebsanleitung

16.2.2 Take over measurement deviation

TPES-B_TPEJ-B-BA-def-2319

<0 mg> is displayed and flashes

Enter measurement incertainty in mg
(numeric input: see chap. 3.3.1)

Press the [S] key

An acoustic signal sounds and the
measurement incertainty is displayed
briefly.

The balance returns to weighing mode

In the enhanced menu navigate to <4.
M.E.H.> and select the setting
0 Do not take over
Take over the measurement incertainty from
1 the adjustment or the adjustment test with
external adjustment weight
65