Mains Connection; Installation Of The Mains Adapter - KERN PES Serie Betriebsanleitung

7.4 Mains connection

Select the country-specific mains plug and insert it into the mains
adapter.
Check, whether the voltage acceptance on the scales is set correctly. The
balance may only be connected to the power supply, when the data on
the balance (sticker) and the local mains voltage are identical.
Only use KERN original mains adapters. Using other makes requires
consent by KERN.
Important:
➢
Prior to start-up check the mains cable for damages.
➢
Ensure that the mains adapter does not come into contact with
liquids.
➢
The mains plug must be accessible at any time.

7.4.1 Installation of the mains adapter

1. Place the country-specific power plug at a slight angle in the recess of the
mains adapter so that the spring points in the direction of the locking arrow
of the mains adapter.
2. Push the locking mechanism of the power plug downwards and press the
power plug into the recess of the mains adapter. Then release the lock
(make sure that the power plug is engaged).
Side view of the power plug (simplified):
TPES-B_TPEJ-B-BA-def-2319
Groove
Spring
21