KERN PES Serie Betriebsanleitung Seite 149

TPES-B_TPEJ-B-BA-def-2319

Place the reference sample for the
tolerance limit on the weighing plate

Press the [F] key to save the reference
value.

An acoustic signal sounds and the value of
the reference sample is displayed briefly (in
this example: Weight value)

Remove reference sample
If the number of tolerance limits is more than 1:

The display shows <H. SEt> (or <L2 SEt>
... <L4 SEt>)

The last value stored for the tolerance limit
is shown and flashes on the display

Place the reference sample for the
tolerance limit on the weighing plate

Press the [F] key to save the reference
value.

An acoustic signal sounds and the value of
the reference sample is displayed briefly (in
this example: Weight value)

Remove reference sample
49